POWER REQUIREMENTS : AC 220 -240 Volts / DC 12 - 14 Volts
AC POWER CONSUMPTION : 160 VA
RMS POWER OUTPUT : 90 W AT 10% T. H. D / 65 WAT 5% T. D. H.RATED                        60 WATTS AT 2% T. H. D / 52 WATTS
OUTPUT REGULATION : 2dB
INPUTS : Mic. 0.65mV, 4.7K / Aux. 100mV, 250K
SIREN :* Fixed Tone/Whaling selectable through a switch.
            * Volume Control for Siren * Led Indication
FREQUENCY RESPONSE : Pre Amp 20-20000Hz + 1dB
                                            Amp. 50-15000Hz + 3dB
SIGNAL TO NOISE RATIO : Bass -10dB at 100Hz /Treble -10dB at10KHz
PREAMP. OUTPUT : 200mV / 600 Ohms
OUTPUT IMPEDANCES : 4-8-16 Ohms
VOLTAGE FOR SPEAKER MATCHING : 100 Volt Line
PROTECTIONS : AC Fuse 250V / 2A / DC Fuse 10A
                          Protected against wrong Battery Polarity
DIMENSIONS / NETWEIGHT : 350 * 260 * 115 mm 7.0KG

POWER OUTPUT : 110W RMS Max. / 80W RMS at 10% THD
                              75W RMS at 5% THD

                              60W RMS at 2% THD
OUTPUT REGULATION : 2dB, no load to full load at 1kHz
INPUT CHANNELS : 5 x Mic 0.65mV/4.7KW(Mic source impedance :                               50W to 1KW )2 x Aux. 1 & 2 100 mV/470kW
FREQ. RESPONSE : 65-15000Hz + 3dBS/N RATIO : 60dB
TONE CONTROLS : Bass-10dB at 100Hz  / Trable-10dB at 10KHz
PRE-AMP OUTPUT : 200mV / 600W
OUTPUT TAPS FOR
SPEAKER MATCHING : 4W , 8W &16W (for direct connection) 70V

                                      &100 Volts Line (for use with LMT)
POWER SUPPLY AC: 220-240V 50/60Hz (110V on request)
                            DC: 12V Car Battery
AC POWER CONSUMPTION : 180VA
DC POWER CONSUMPTION : 3A
DIMENSIONS/WEIGHT : W355 x H133 x D285mm/8.5kg.

POWER OUTPUT : 130W RMS Max. / 100W RMS at 10% THD
                               90W RMS at 5% THD/80W RMS at 2% THD

OUTPUT REGULATION : <2 dB, no load to full load at 1kHz

INPUT CHANNELS: 5 x Mic, 0.65mV / 4.7KW (Mic source impedance

50W to 1kW)1 x Aux. 1 50mV/470kW / 1 x Aux. 2 10mV/470kW
FREQUENCY RESPONSE : 50 - 15000Hz + 3dB
SIGNAL TO NOISE RATIO : 60db
TONE CONTROL : Bass - 10dB at 100Hz /  Treble - 10dB at 10kHz

Switch at Box. Speaker Position : Bass - 10dB at 100Hz
Switch at Driver Position : Treble - 10dB at 10kHz

PRE-AMP. OUTPUT : 200mV/600  /   LINE OUTPUT : 1V / 1KW
OUTPUT TAPES FOR  
SPEAKER MATCHING : 4,8 & 16W , (for direct connections)

                  70 & 100V Line (for use with LMT)

POWER SUPPLY : AC : 220 - 240 Volts / 50/60Hz (110V on request)
                       DC : 24V (2 x 12V Car Battery)

AC POWER CONSUMPTION  : 220 VA
DC POWER CONSUMPTION  : 3 A
DIMENSIONS : W420 x H135 x D290mm  / NET WEIGHT : 10.5kg

POWER OUTPUT : 160W RMS Max. / 120W RMS at 10% THD
                              105W RMS at 5% THD/95W at 2% THD

OUTPUT REGULATION : <2 dB, no load to full load at 1kHz
INPUT CHANNELS : 5 x Mic, 0.65mV / 4.7KW
                          (Mic source impedance 50W to 1kW)
                         1 x Aux. 1 : 100mV/470kW 1 x Aux. 2 : 100mV/470kW
FREQUENCY RESPONSE :  50 - 15000Hz ±3dB
SIGNAL TO NOISE RATIO : 60db
TONE CONTROL
Switch at Box. Speaker Position :  Bass - 10dB at 100Hz
Switch at Driver Position : Treble - 10dB at 10kHz

PRE-AMP. OUTPUT :   200mV/600W /  LINE OUTPUT : 1V / 1KW
OUTPUT TAPES FOR 
SPEAKER MATCHING :  4,8 & 16W , (for direct connections)
                                       70V & 100V Line (for use with LMT)

POWER SUPPLY : AC : 220 - 240 50/60Hz / DC : 12V (12V Car Battery)

AC POWER CONSUMPTION : 250 VA
DC POWER CONSUMPTION : 5.5 A

DIMENSIONS : W420 x H135 x D285mm 

NET WEIGHT : 11.3kg