|
GENERAL PA
INSTALLED SOUND SERIES |
GENERAL PA
INSTALLED SOUND SERIES |
(OPTIONAL TO BE PURCHASED SEPARATELY) |
|
|
Freq. Response : 50-16,000Hz
Sensitivity : 4mV/Pa
Impedance : 1000 Ohms* Wide frequency response.
* High front-to-back rejection for more gain Before feedback.
* Built-in XLR socket |
Freq. Response : 20-18,000Hz
Sensitivity : 7.5 mV/Pa
Impedance : 1000 Ohms
Wide frequency response.
* High front-to-back rejection for more gain Before
* Built-in XLR socket
|
* Heavy weight housing with
anti-skid feet ensures stability.
* 10 mtrs. Shielded 2-core
mic cable with XLR connector & 1/4” phone plug.
* Built-in cell housing for 2xUM-3 pencil cells (3V)for operating the
condenser microphone.
* On/Off switch provided. Special electronic circuitry
for minimal switch noise. |
* 10 mtrs. 2-core shielded cable with
in-line cell housing.
* Operates on 1.5V(1xUM-3) pencil cell provided
* Special circuitry employed for minimal switch noise.
* Threaded brass ferrule with 5/8” x27 TPI, suitable for standard
microphone stands. |
|
MIKE HOLDERS
P X09 BRASS THREAD MH02B
P X21 SPEAKERS GRILLE PG401
P X22 MOUNTING BRACKET MBK06
P X25 GRILLE PG809
P X26 GRILLE Pg810
P X27L BRASS THREAD
N/A
P X28L BRASS SPRING |
  |
|
MULTI-MIKE BASE |
|
P X06 MB-203 |
 |
|
|
IT CODE: A MIC51
MODEL : UTP 30 |
Frequency Response 100-15,000Hz
Sensitivity 7.0mV/Pa
Impedance 1000W
Operates on : 1×1.5V (UM-3) Pencil Cell
|
Miniature
unidirectional electret condenser lavalier type
microphone for lectures, interviews, religious places,
recordings etc. A strong, fixed tie-clip prevents the
microphone from being displaced accidentally.
Also a neck-band is supplied if the tie-clip is not to
be used.
The cell container is provided to accommodate a single
pencil cell. The cable length is 6.0 mtrs.
|
